THUMB LOCK FASTENERS
Thumb Lock - The Adhesive The
adhesive used for the Thumb Lock system is the strongest self-sticking adhesive
made by the 3M company. It provides exceptional holding strength in conditions
of heavy vibration and jarring movement.
Remarkably, the adhesive is non-hardening and peels off cleanly from most fastening
surfaces, even gloss wood finishes.
This allows the use of Thumb Lock for temporary Hold-down applications (on trips)
without risk of damage to countertops or furniture. Replacement adhesive pads
are available to reuse the fasteners.
Fasteners -Model T-1, T-2, T-4: Injection molded GPC Delta ABS plastic. (UV inhibitors in white only). Model T-6: Injection molded polycarbonate, LEXAN™ 141
Locking Strap (colored) - Polyurethane coated polyester webbing, 3/4" and 1" width, thickness .060", rated breaking strength 1,000 lb./inch width, operating temperature (+ 225o to -40o). Strap is weather proof and tear proof. It can be perforated, sewn, riveted, heat welded, screw-fixed, and cuts to size with scissors.
Locking Strap (white) -Vinyl coated polyester webbing (with
UV inhibitors). Width, thickness, rated breaking strength, and use
options are the same as above. Operating temperature (+225o
to -20o F).
3/4" & 1" Wide Straps are Available in 4'Lengths & 100'Rolls
Fastening Set Consists of: